Dongguan Yong Gan Machinery Co., Ltd.
Main products:shoe machine,laminating machine,coating machine,leather printing machine,leather polishing machine
Contact Us
  • Contact Person : Mr. Xiong Cain
  • Company Name : Dongguan Yong Gan Machinery Co., Ltd.
  • Tel : 0086-0769-85157716
  • Fax : 0086-0769-85158221
  • Address : Guangdong,Dongguan,#39 Jinda Road, Juqi Management District, Humen Town, Dongguan City, Guangdong Province, China
  • Country/Region : China
  • Zip : 523900

YA-02BC2 Leather Machine for Embossing, Hot Stamping and Laminating

YA-02BC2 Leather Machine for Embossing, Hot Stamping and Laminating
Product Detailed
1. multi-function leather machine for embossing,hot stamping,laminating 2. leather surface treatment


1. This leather machine mainly used in embossing all kinds of patterns and embossed, stamp transfer all kinds of decorative gold and silver, and pattern film on the surface of all kinds of artifical leather, plastic leather, PU and PVC.

2.  With lamination function to make the surface treatment and laminating processing will be finished during one working procedure.

3. It equipped with speed regulation system VVVF control, and automatic temperature control system; it also can measure the length, easy to control production output and product quality.

4. Diameter of heating roller is optional

5. New design structure, reliable technology, easy operation, low breakdown rate, long service time.

6. High-efficiency cooling device insure the application range of the basic materials.

7. Single action and linkage are available

Technical data:






110 KW

Stamping specification


Motive Power

10HP+3HP (Computer VVVF control)

Working Width

1830 mm (72'')

Working Speed

0-45 m/min

Range of application

This leather machine is suitable for producing:

1. Shoe making materials, such as stamp transfer decorative gold and sliver foil, pattern film on the surface of all kinds of artificial leather.

2. Handbag making materials, such as pattern film on the surface of all kinds of PU, PVC leather.

3. Table Cover making materials, such as laminate the nonwoven fabric with plastic leather

Caution for using YA-02BC21. The machine surface should be without watermarks, oil, dust, debris, large drum, mesh belt, rolling wheels, idler pulley, plastic pots, plastic roller, pulp wheel, knife plate should wipe, wash clean.2. Strictly prohibited on-load open, barrier gate.3. Motor can never exceed the load (110%); accelerate, deceleration turning "speed adjustment" knob should be careful, and gradually transferred to the required speed, or easily damaged motor.4. Forbid to operate "positive inversion switch" when machinery is in running, otherwise fragile to damage converter and motor.5. To adjust the wheel of stepless variable speed machine can fine-tune the tightness of gluing when machine running, keep material speed synchronous with the heating roller, but prohibit to rotate the hand wheel when machine stop, (that is to say can not change speed), Otherwise, easy to damage stepless gearbox.6. Keep waxing regularly on stepless gearbox, motor belts, often add oil in chains, bearings, cylinder stroke, and change oil regularly in worm gear reducer to ensure its lubrication, running well.7. Inverters data has been set well before leaving the factory, non-professionals is strictly prohibited to change, set, disassembly and repair.

YA-02BC2 Leather Machine for Embossing, Hot Stamping and Laminating

Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.